200T P30

Specifications For: 200T P30
Model No.	200T P30
Workspace	28.7'' W x 16''D x 16''H
Overall Dim	29.5'' W x 18''D x 32''H
Power Requirements	110V, 60Hz Single Phase
Weight
Blower
Noise Level	<60dB

Features

Built-in sealed polypropylene worktop
Compact cost-effective models
Polypropylene structure with high chemical resistance
Analog Control Panel

Download PDF

Download Datasheet 200T P30 - Fume Hoods

Description
Performance
Diagrams

Description

Product Description

The P Series Ductless Fume Hood provides a safe work environment for lab staff working with acids and harsh chemicals.

Our ductless fume hoods are equipped with a powerful and efficient fan that pulls air through the hood's inlet and into the filtration membrane. The system is designed to keep harmful airborne contaminates away from the operator's respiratory zone. Various filter media is used depending on the type of chemical vapors and or particulate that are generated. Since the air is recirculated, no exterior ducting is necessary.

ADDITIONAL FEATURES
- Polycarbonate sliding front sash
- Operational sach opening - 8''
- Full opening - 18'' - Eco-Friendly, cost-effective 800 LUX LED lighting
- Wind speed 100+/- 20 FPM
- Back access for filter replacement
- Variety of HEPA and Carbon filters
- EC fan -High efficiency low energy consumption

Performance

Performance

200T P30

Filters Installed Max Airflow
CFM Face Velocity
FPM

None 100+/-20FPM

HEPA

HEPA/Dacron/.5" Carbon

HEPA/Dacron/2" Carbon

0.5" Carbon

2" Carbon

2 each - 2" Carbon

Diagrams

Diagrams

Recently Viewed Item

PF-1 Pre Filter

Model Number: PF-1

Prefilters are used when pollutants will be present in large enough quantities to rapidly clog HEPA or carbon filters. Dacron Filters are 4 ply with decreasing pore sizes for each ply. They are rated at 60% efficient for particles of 5 microns or larger. As such, they will remove most gross particulates, saving the HEPA for only the smallest particles. They are also used with carbon when the environment is dusty enough to reduce carbon filter effectiveness or as an after filter to contain possible carbon particle emission.

Warranty
Airfiltronix Corporation warrants its equipment to be free from defects in material and workmanship for a period of 12 months from the date of shipment. Repair or replacement will be made at no charge at the discretion of Airfiltronix if the defect is not the result of misuse or abuse. Airfiltronix accepts no consequential liability for delay in delivery, alleged faulty performance of the product, or any other cause. Continue Reading

Price: $3,039

Dimensions: 29.5'' W x 18''D x 32''H

Description

Product Description

Performance

Performance

Diagrams

Diagrams

Airfiltronix, a division of Glas-Col, LLC

711 Hulman Street PO BOX 2128 Terre Haute, IN 47802 - Phone: 800.452.7265

	200T P30
Filters Installed	Max Airflow CFM	Face Velocity FPM
None		100+/-20FPM
HEPA
HEPA/Dacron/.5" Carbon
HEPA/Dacron/2" Carbon
0.5" Carbon
2" Carbon
2 each - 2" Carbon

	PF-1 Pre Filter
	Model Number: PF-1
	Prefilters are used when pollutants will be present in large enough quantities to rapidly clog HEPA or carbon filters. Dacron Filters are 4 ply with decreasing pore sizes for each ply. They are rated at 60% efficient for particles of 5 microns or larger. As such, they will remove most gross particulates, saving the HEPA for only the smallest particles. They are also used with carbon when the environment is dusty enough to reduce carbon filter effectiveness or as an after filter to contain possible carbon particle emission.